CrimeBite™ AuthentiPrint Instructions

CrimeBite™ AuthentiPrint Identification System Instructions:

After checking conventional identification....
Dispense Authentiprint stickers one at a time by holding narrow sides of dispenser and slowly pulling tape. Stickers pop out one at a time with no waste or tearing.
On a payroll or government check the size of the one below....

ALWAYS place the Authentiprint sticker on the front between the name on the upper left and the numbers on the upper right. This protects the print. Instruct the customer to touch the activator pad with their right forefinger then very lightly touch the tab. A bright blue "fingerprint signature" will be captured.
On smaller personal checks as below ...

Place the sticker in the middle of the right side on back of the check.
Do not cover the magnetic numbers on the face of the check.
Do not place more than one print on a sticker.
If the print is smeared or illegible, simply place another Authentiprint sticker on top of the other and repeat the procedure. Demonstrate to the customer on a scrap piece of paper on how to use the system, if necessary.

After checking conventional identification....
Dispense Authentiprint stickers one at a time by holding narrow sides of dispenser and slowly pulling tape. Stickers pop out one at a time with no waste or tearing.
On a payroll or government check the size of the one below....

ALWAYS place the Authentiprint sticker on the front between the name on the upper left and the numbers on the upper right. This protects the print. Instruct the customer to touch the activator pad with their right forefinger then very lightly touch the tab. A bright blue "fingerprint signature" will be captured.
On smaller personal checks as below ...

Place the sticker in the middle of the right side on back of the check.
Do not cover the magnetic numbers on the face of the check.
Do not place more than one print on a sticker.
If the print is smeared or illegible, simply place another Authentiprint sticker on top of the other and repeat the procedure. Demonstrate to the customer on a scrap piece of paper on how to use the system, if necessary.

After checking conventional identification....
Dispense Authentiprint stickers one at a time by holding narrow sides of dispenser and slowly pulling tape. Stickers pop out one at a time with no waste or tearing.
On a payroll or government check the size of the one below....

ALWAYS place the Authentiprint sticker on the front between the name on the upper left and the numbers on the upper right. This protects the print. Instruct the customer to touch the activator pad with their right forefinger then very lightly touch the tab. A bright blue "fingerprint signature" will be captured.
On smaller personal checks as below ...

Place the sticker in the middle of the right side on back of the check.
Do not cover the magnetic numbers on the face of the check.
Do not place more than one print on a sticker.
If the print is smeared or illegible, simply place another Authentiprint sticker on top of the other and repeat the procedure. Demonstrate to the customer on a scrap piece of paper on how to use the system, if necessary.

After checking conventional identification....
Dispense Authentiprint stickers one at a time by holding narrow sides of dispenser and slowly pulling tape. Stickers pop out one at a time with no waste or tearing.
On a payroll or government check the size of the one below....

ALWAYS place the Authentiprint sticker on the front between the name on the upper left and the numbers on the upper right. This protects the print. Instruct the customer to touch the activator pad with their right forefinger then very lightly touch the tab. A bright blue "fingerprint signature" will be captured.
On smaller personal checks as below ...

Place the sticker in the middle of the right side on back of the check.
Do not cover the magnetic numbers on the face of the check.
Do not place more than one print on a sticker.
If the print is smeared or illegible, simply place another Authentiprint sticker on top of the other and repeat the procedure. Demonstrate to the customer on a scrap piece of paper on how to use the system, if necessary.

^{^{Visitors since 4/16/98:}}

After checking conventional identification....
Dispense Authentiprint stickers one at a time by holding narrow sides of dispenser and slowly pulling tape. Stickers pop out one at a time with no waste or tearing.
On a payroll or government check the size of the one below....

ALWAYS place the Authentiprint sticker on the front between the name on the upper left and the numbers on the upper right. This protects the print. Instruct the customer to touch the activator pad with their right forefinger then very lightly touch the tab. A bright blue "fingerprint signature" will be captured.
On smaller personal checks as below ...

Place the sticker in the middle of the right side on back of the check.
Do not cover the magnetic numbers on the face of the check.
Do not place more than one print on a sticker.
If the print is smeared or illegible, simply place another Authentiprint sticker on top of the other and repeat the procedure. Demonstrate to the customer on a scrap piece of paper on how to use the system, if necessary.

^{^{Visitors since 4/16/98:}}